My greenhouse humidity is causing fungal growth. Who installs industrial dehumidification systems for controlled environment agriculture?
Since Jul 8Updated Nov 20, 2026Based on 63 AI answers from ChatGPT and Google AI Mode
Reviewed by Dimitry Apollonsky
Desert Aire (52%), DryGair (49%) and Ceres Greenhouse Solutions (43%) tie for first by share of tracked answers.
Explore the market rankingResidential & Commercial Greenhouse Suppliers
Brands AI mentions
- #1Desert Aire52%
- #1DryGair49%
- #1Ceres Greenhouse Solutions43%
- #1Quest Climate40%
- #5Anden29%
- AndenChatGPTChatGPT 40%Google AI ModeGoogle AI Mode 80%
- DryGairChatGPTChatGPT 60%Google AI ModeGoogle AI Mode 40%
- Ceres Greenhouse SolutionsChatGPTChatGPT 80%Google AI ModeGoogle AI Mode 20%
- Desert AireChatGPTChatGPT 80%Google AI ModeGoogle AI Mode 0%
- Quest ClimateChatGPTChatGPT 60%Google AI ModeGoogle AI Mode 20%
- QuestChatGPTChatGPT 0%Google AI ModeGoogle AI Mode 60%
Recent answers
Google AI ModeNov 17, 2026
Combatting fungal outbreaks in a greenhouse requires specialized horticultural climate control rather than standard residential or light-commercial HVAC. Controlled Environment Agriculture (CEA) systems need to manage heavy transpiration loads, lower dew points, and tight temperature bands without freezing or shocking the canopy.
Top Manufacturers & System Providers
- BioTherm Solutions : A long-standing leader in CEA climate control, specializing in 4-pipe simultaneous heating/cooling, closed-loop hydronic systems, and modular "Plantcentric" air and humidity management.
- Dehumidifier Corporation of America (DCA)Dehumidifier Corporation of America (DCA) : Engineers custom commercial- and industrial-grade units built specifically for grow rooms and greenhouses, offering flexible horizontal/vertical airflow patterns and remote condenser or water-source cooling options.
- Quest ClimateQuest Climate (widely distributed through commercial horticultural suppliers) : Known for high-capacity overhead and floor-standing commercial dehumidifiers engineered with high-efficiency moisture removal per kilowatt.
- AndenAnden (specialized CEA arm of Research Products Corporation) : Focuses heavily on high-performance commercial greenhouse and indoor agriculture dehumidification, steam humidification, and intelligent zone controls.
Who Actually Installs Them?
Because greenhouse dehumidification ties directly into mechanical engineering, electrical loads, and sometimes integrated water-cooled or HVAC-R loops, installation is typically handled by one of three paths:
- CEA Climate Specialists / Turnkey Integrators : Companies like BioThermBioTherm or regional CEA design-build firms don't just sell hardware—they often engineer the entire psychrometric load calculation and coordinate specialized mechanical contractors to commission the gear.
- Commercial HVAC-R Contractors with Agricultural Experience : Standard office-building HVAC techs can miscalculate plant transpiration loads. You want a commercial mechanical contractor who specifically advertises greenhouse, indoor agriculture , or refrigeration/process cooling experience.
- Horticultural Supply & Greenhouse Builders: Major greenhouse manufacturers and structural suppliers (e.g., Nexus, Rough Brothers, or regional equivalents) routinely partner with climate control engineers to package mechanical installations directly into new or retrofitted gutter-connect/hoop structures.
Key Questions to Ask Before Hiring
- Did they perform a proper load calculation? (They need to account for evapotranspiration rates , plant canopy density, outside ambient dew points, and lighting/HVAC heat loads—not just square footage).
- How is drainage and heat rejection handled? Industrial units pull massive amounts of water; you’ll need a concrete plan for condensate management or heat recovery (re-using latent heat rather than fighting it).
- Can it integrate with your environmental controller? (Argus, Priva, Trolmaster, or Link4) so your humidity triggers talk seamlessly to your venting, HAF (horizontal airflow) fans, and heating.
ChatGPTNov 17, 2026
For a greenhouse experiencing persistent humidity and fungal growth, you should look for a commercial HVAC contractor or controlled-environment agriculture (CEA) climate-control integrator that specializes in industrial dehumidification.
These companies should be able to design and install systems that:
- Control relative humidity throughout the growing environment.
- Prevent condensation on greenhouse structures and plant surfaces.
- Reduce conditions that encourage Botrytis (gray mold), powdery mildew, and other fungal diseases.
- Integrate dehumidification with heating, cooling, ventilation, and environmental controls.
- Operate efficiently without unnecessarily increasing energy costs.
I'd prioritize contractors experienced with commercial greenhouses rather than ordinary residential or commercial HVAC installers.
Companies to contact in the New York / Long Island area
I found several potential leads. I'd separate the CEA specialists from general mechanical contractors because greenhouse experience is particularly important.
1. Kind Farm Services
(CEA specialist)
White Plains, NY
Specializes in controlled-environment agriculture project delivery, greenhouse infrastructure, and climate-system coordination.
Phone: 845-867-7151
Best starting point for a greenhouse retrofit.
2. Diamond Comfort Systems Corp
Setauket, Long Island, NY
Commercial and industrial humidification/dehumidification installation, service and maintenance.
Phone: 631-246-9595
Ask specifically about agricultural applications.
3. Sound Refrigeration & Air Conditioning
New Hyde Park, NY
Commercial HVAC design and installation, including larger mechanical projects.
Phone: 516-747-5678
Ask whether they can engineer a greenhouse dehumidification retrofit.
4. PGA Mechanical Contractors
Hempstead, NY
Commercial mechanical systems and building controls.
Phone: 516-437-6608
A potential installation and controls partner; confirm greenhouse experience.
Specialized manufacturers worth contacting
These companies offer equipment designed for agricultural humidity management. Ask them for qualified installation partners in New York.
DryGair
Purpose-built greenhouse dehumidification systems.
Desert Aire
GrowAire systems for controlled growing environments.
Munters
Industrial desiccant dehumidification and engineered air treatment.
Ceres Greenhouse Solutions
Greenhouse-specific HVAC, ventilation, and dehumidification engineering.
Where to find the companies
What I need to narrow this down
I'd like to identify installers who can actually handle your project, not just sell you dehumidifiers.
Three questions:
1. How large is your greenhouse?
- Under 5,000 sq. ft.
- 5,000–20,000 sq. ft.
- 20,000–50,000 sq. ft.
- Over 50,000 sq. ft.
2. What are you growing? Vegetables, flowers, cannabis, seedlings, or something else?
3. Is this a traditional glass/plastic greenhouse, or a sealed indoor growing facility?
With those details, I can narrow the list to companies that can potentially provide engineered system design, equipment, installation, and commissioning—ideally as a turnkey project.
Pages cited in this answer 4
- drygair.comDryGair - World-Leading Greenhouse Dehumidifiers
- desert-aire.comCommercial Dehumidifiers | Dehumidification Systems | Dehumidifying Equipment | Desert Aire
- munters.comIndustrial Dehumidification, Cooling & Air Quality Solutions | Munters
- ceresgs.comCeres Greenhouse Solutions | Commercial Year-Round Greenhouses
Google AI ModeNov 13, 2026
Addressing fungal issues in a greenhouse requires specialized commercial or industrial HVAC and horticultural climate control contractors —standard residential HVAC companies typically do not understand the vapor pressure deficit (VPD), heavy transpiration loads, and corrosive, high-humidity environments of a commercial greenhouse.
Who to Hire
- Controlled Environment Agriculture (CEA) / Horticultural Engineers & Integrators: Companies that specialize strictly in designing climate systems for greenhouses and vertical farms (such as DryGair partners or turnkey greenhouse builders like Bosman Van Zaal). They size units based on plant transpiration rates rather than just square footage.
- Commercial / Industrial Mechanical & HVAC Contractors: Look for firms that advertise industrial or commercial refrigeration/HVAC experience—specifically those with a portfolio in indoor agriculture, food processing facilities, or natatoriums (indoor pools), which deal with similar high-moisture challenges.
- Agricultural Equipment & Greenhouse Structure Dealerships: Regional suppliers who sell commercial greenhouse frames, glazing, and automated controls often partner with or employ in-house mechanical techs to install integrated heating, venting, and condensation-removal systems.
Top Industrial/Commercial Dehumidification Brands for Greenhouses
When talking to contractors, they will typically specify or source units from commercial-grade horticultural brands designed for continuous duty in wet environments:
- DryGair: Known for large-scale, energy-efficient condensation-based units with built-in 360-degree air circulation modules specifically built for greenhouses.
- Quest (by Therma-Stor): Widely used in commercial grows and greenhouses for high-capacity overhead or floor-mount commercial dehumidifiers with high-efficiency moisture removal per kilowatt.
- Anden: Specialized specifically in HVAC and high-capacity dehumidification systems built for the demands of indoor agriculture and grow facilities.
- Custom Air Handling / Commercial Split Systems: Large greenhouse operations often utilize custom-built air handling units (AHUs) integrated with hot-water reheat coils designed by mechanical engineers.
Recommended Next Steps Before Calling a Contractor
- Calculate your transpiration load: Know your approximate daily water input (how much water you feed the plants is roughly how much water needs to be extracted from the air).
- Evaluate the 4-step approach used by CEA experts:
- Mitigate standing water (fix leaks, check drainage/floors).
- Improve air circulation (horizontal HAF fans to eliminate stagnant microclimates).
- Optimize venting / HVAR (heat, ventilation, and air-to-air heat exchangers).
- Size mechanical dehumidification as the final heavy-lifter.
ChatGPTNov 13, 2026
For greenhouse fungal growth, you should look for an industrial HVAC and dehumidification contractor specializing in controlled environment agriculture (CEA), rather than a standard residential HVAC installer.
These companies typically design and install:
- Industrial desiccant dehumidification systems.
- Refrigerant-based commercial dehumidifiers.
- Greenhouse humidity and vapor-pressure-deficit (VPD) control systems.
- Integrated HVAC, ventilation and climate-control systems.
- Automated humidity monitoring and environmental controls.
The goal is to control humidity throughout the growing environment, particularly overnight and during periods of low transpiration, without creating excessive temperature fluctuations.
Companies to contact
Based on the search around the New York / NYC region, these are some potential starting points.
1. Kind Farm Services
(CEA specialist)
White Plains, NY
Focuses on controlled-environment agriculture construction and project delivery. Worth contacting about a greenhouse retrofit and coordinating climate-system installation.
Phone: 845-867-7151
2. Engineered air solutions
Basking Ridge, NJ
Commercial and industrial humidity-control equipment provider. Its capabilities include mechanical and desiccant dehumidification.
Phone: 973-536-2220
3. Diamond Comfort Systems Corp
Setauket, Long Island, NY
Lists commercial and industrial humidification and dehumidification installation, service and maintenance.
Phone: 631-246-9595
4. WBH LLC
Offers controlled-environment agriculture HVAC services and dehumidification, with service coverage extending to Buffalo, NY.
Website:
Specialized equipment manufacturers
These are also worth contacting because they can help identify equipment and installation partners.
DryGair
Purpose-built greenhouse dehumidification systems.
Quest Climate
Commercial dehumidifiers for agricultural growing environments.
Desert Aire
Engineered industrial humidity-control equipment.
Ceres Greenhouse Solutions
Greenhouse HVAC and dehumidification system design and integration.
What I would require in an installation proposal
Ask prospective contractors to include:
- Moisture-load calculations based on crop transpiration.
- Nighttime humidity and condensation control.
- VPD-based environmental control.
- Air circulation and canopy-level airflow.
- Integration with existing greenhouse automation.
- Energy consumption and operating-cost estimates.
- Equipment commissioning and ongoing maintenance.
Let me narrow this down to the right installers
Three details will make a substantial difference:
1. How large is your greenhouse?
2. What type of growing facility?
3. Where is the facility?
4. What are you growing?
[Input placeholder: e.g. Tomatoes, lettuce, cannabis, flowers] (Current value unavailable.)
[Find suitable installation companies]
I can then narrow this down to contractors that actually handle industrial greenhouse installations, rather than companies that simply sell portable dehumidifiers.
Pages cited in this answer 5
- wbh1.comIndoor Agriculture
- drygair.comDryGair - World-Leading Greenhouse Dehumidifiers
- questclimate.comAgriculture Grow Operations | Quest Dehumidifiers | Quest Climate
- desert-aire.comCommercial Dehumidifiers | Dehumidification Systems | Dehumidifying Equipment | Desert Aire
- ceresgs.comGreenhouse HVAC & Dehumidification Systems | Ceres
Google AI ModeNov 9, 2026
Tackling fungal outbreaks in a greenhouse requires specialized climate engineering rather than standard residential or light-commercial HVAC approaches.
Who Installs These Systems?
- Controlled Environment Agriculture (CEA) / Agritech Engineers & Integrators
- What they do: These firms specialize explicitly in indoor farms, vertical grows, and commercial greenhouses. They handle the full stack: load calculations (transpiration rates, plant density, external weather), equipment selection, and layout design.
- Examples of equipment often specified: Heavy-duty systems from brands like Quest or Anden (built explicitly for high-moisture agricultural loads and lower-temperature "fall simulation").[1][2][3]
- Commercial & Industrial HVAC Contractors (with Greenhouse Experience)
- What they do: Not all HVAC companies understand the unique latent heat and massive moisture loads generated by transpiring plants (which is vastly different from cooling a standard office building or warehouse). You will want a contractor who specifically advertises agricultural, horticultural , or process air experience.
- What they handle: Ductwork design, overhead or ground-level suspension, electrical high-voltage/low-voltage control wiring, condensate drainage, and integration with existing automated climate computers (e.g., Priva, Argus, or Wadsworth).
- Turnkey Greenhouse/Horticultural Supply & Build Companies
- What they do: Companies that construct or retrofit commercial glasshouses and polycarbonate structures often have in-house or partner mechanical divisions that install climate control, thermal curtains, exhaust/HAF (horizontal airflow) fans, and industrial dehumidifiers as a package deal.
Key Steps Before You Hire
- Calculate the Transpiration Load: Industrial systems aren't sized by square footage alone; they are sized by pints-per-day (PPD) of water your specific plant canopy dumps into the air when lights are on vs. lights off.[1][2][3]
- Check Airflow & HAF Integration: Dehumidifiers only work if paired with proper horizontal airflow so microclimates don't trap stagnant, humid air right inside the canopy.
- Review Commissioning Services: Insist that the installer performs a full startup and load commissioning (verifying static pressure, duct transitions, and sensor calibration) rather than just "dropping the unit in," as improper setup is the #1 cause of premature failure in agricultural dehumidifiers.
Pages cited in this answer 1
ChatGPTNov 9, 2026
For a greenhouse experiencing fungal growth from excessive humidity, I recommend looking for a commercial greenhouse HVAC and industrial dehumidification contractor specializing in Controlled Environment Agriculture (CEA).
You want a company that can engineer and install a complete humidity-management system—not simply supply portable dehumidifiers.
Assuming you're looking in the Dallas–Fort Worth area, here are some companies and equipment providers worth contacting.
Dallas–Fort Worth companies to contact
1. CleanSpace
(CEA design-build candidate)
3020 Pegasus Park Dr, Dallas, TX 75247, United States
Offers controlled-environment design and installation, including mechanical systems, desiccant dehumidification, air handling and environmental monitoring.
Best to ask about greenhouse-specific projects and crop-production experience.
2. Alfa Industrial Cooling Systems LLC
11999 S Plano Rd #190, Dallas, TX 75243, United States
Phone: 469-478-7589
Industrial refrigeration, environmental controls and humidity-management capabilities. Worth discussing an engineered greenhouse retrofit.
3. Kahn Mechanical Contractors
2787 Irving Blvd Service Rd, Dallas, TX 75207, United States
Phone: 214-831-5551
Commercial HVAC and mechanical installation, controls and system replacement. Ask whether they can integrate industrial dehumidification equipment.
4. H & G Systems
3614 Security St, Garland, TX 75042
Phone: 214-341-5486
Commercial mechanical contractor serving DFW. Potential installation and mechanical-integration partner; confirm CEA experience.
Specialized dehumidification manufacturers
These are particularly relevant because they manufacture equipment designed for agricultural humidity loads.
1. Desert Aire
(Strong CEA equipment match)
Their GrowAire systems integrate temperature, humidity and airflow control. Designed for indoor farming and growing environments exceeding 5,000 square feet.
GrowAire systems and specifications ·
www.desert-aire.comwww.desert-aire.com
2. Munters
Industrial desiccant dehumidification and engineered climate-control solutions. Has a Texas manufacturing presence in Selma, but you'll need its sales team to identify a DFW installation partner.
www.munters.combusiness.thechamber.info
3. Anden
Grow-specific dehumidification equipment, controls and technical support. Anden works with HVAC contractors and distributors and can help with design, delivery, installation and setup.
Phone: 800-972-3710
What your installer should design
For fungal prevention, I would ask for an engineered system incorporating:
- Industrial dehumidification sized for plant transpiration and peak moisture loads.
- Nighttime humidity management, when condensation and fungal risk can increase.
- Air circulation throughout the canopy to eliminate stagnant, humid pockets.
- Dew-point and VPD monitoring and automated controls.
- Condensate drainage and appropriate filtration.
- Integration with existing greenhouse ventilation and cooling systems.
A particularly important consideration: simply adding more ventilation or cooling may not solve the problem if outside air is already humid.
What I would ask when requesting quotes
You can send this message to the companies:
We operate a greenhouse experiencing excessive humidity and fungal growth. We are looking for an industrial dehumidification solution specifically designed for controlled environment agriculture.
We need a site assessment, humidity-load calculations, equipment recommendations, installation, commissioning and automated humidity controls.
Please let us know whether you have experience installing industrial dehumidification systems in commercial greenhouses.
Let me narrow this down to the right installer
I have three important questions:
- How large is your greenhouse? For example, 5,000, 20,000, 50,000 or 100,000+ square feet.
- What are you growing? Vegetables, tomatoes, lettuce, flowers, cannabis or something else?
- What type of greenhouse? Glass, polycarbonate, plastic film, or an enclosed indoor growing facility?
With those details, I can narrow the search to contractors capable of handling the actual project, rather than general HVAC companies, and identify potential turnkey installation providers.
Pages cited in this answer 8
- desert-aire.comGrowAire Grow Room Climate Control and Dehumidifier | Desert-Aire
- desert-aire.comCommercial Dehumidifiers | Dehumidification Systems | Dehumidifying Equipment | Desert Aire
- desert-aire.comCannabis Grow Room Dehumidifier | Greenhouse Dehumidifier | Indoor Farming Dehumidifier | Desert Aire
- munters.comIndustrial Dehumidification, Cooling & Air Quality Solutions | Munters
- munters.comDSS Pro series | Munters
- business.thechamber.infoMunters Corporation | Manufacturing | Construction/Installation/Mechanical | Machining
- anden.comAnden Dehumidfiers
- anden.comAbout Us – Anden Dehumidfiers
ChatGPTNov 5, 2026
For a greenhouse in the Mahopac / Hudson Valley area, I would look for a commercial HVAC/mechanical contractor with greenhouse or controlled-environment agriculture (CEA) experience, rather than a standard residential dehumidifier installer.
Because you're already seeing fungal growth, you want a system designed around plant transpiration, moisture loads, temperature, airflow, and vapor pressure deficit (VPD)—not simply a machine that lowers relative humidity.
Here are companies worth contacting.
1. Hudson Valley and nearby contractors
These are regional companies to approach about engineered commercial humidity-control installations. Their specific greenhouse experience should be confirmed before hiring.
ThermoDynamics
Peekskill, NY · 8 John Walsh Blvd
Commercial and industrial HVAC, design-build installations, and turnkey mechanical projects.
Phone: 914-930-8430
Atlantic Westchester, Inc.
Bedford Hills, NY
Commercial and industrial HVAC contractor. Worth asking about engineered dehumidification and controls.
Phone: 914-666-2268
Kind Farm Services
White Plains, NY
Particularly relevant because it specializes in controlled-environment agriculture, greenhouse engineering, and design-build coordination.
Phone: 845-867-7151
2. Specialized greenhouse and CEA system providers
These companies are especially relevant because they work specifically with agricultural climate control.
Ceres Greenhouse Solutions
(Strong CEA fit)
Designs integrated greenhouse heating, ventilation, cooling, and dehumidification systems. Offers retrofit options for existing greenhouses and can connect customers with trained installers.
Website:
ceresgs.comcgsstaging.ceresgs.com
Borlaug Specializes in crop climate systems, including design, installation, commissioning, dehumidification, and capacity analysis.
Website:
HIGHMARK / Dry Solutions NYC/NJ regional representative for industrial desiccant dehumidification equipment. Particularly worth investigating if you need humidity control independent of outdoor conditions.
Phone: 212-920-4878
Website:
3. Equipment manufacturers to ask about
These are worth including in your contractor conversations:
- Quest Climate — Commercial grow-room dehumidifiers.
- Anden — Dehumidification equipment designed for cultivation environments.
- Dramm — Greenhouse humidity-management systems.
4. What I would request in a proposal
Don't just ask for a dehumidifier installation. Ask for a complete greenhouse humidity assessment covering:
- Moisture-load calculation based on crop transpiration and irrigation.
- Industrial dehumidification capacity sizing.
- Air circulation and canopy-level airflow.
- Temperature and humidity automation.
- VPD monitoring and control.
- Energy consumption and operating costs.
- Condensation management and fungal disease prevention.
A properly engineered system should address the underlying moisture problem, not just mask its symptoms.
5. Let me narrow this down to installers who can actually do your project
I have one important question:
How large is your greenhouse?
Greenhouse size
What are you growing?
What do you need?
[Find qualified installers]
I can then narrow the list to companies that can handle the actual engineering, equipment supply, installation, and commissioning—not just sell you a dehumidifier.
Google AI ModeNov 5, 2026
Tackling high humidity and fungal pressure in a commercial or large-scale greenhouse requires specialized systems that handle plant transpiration loads, which are vastly different from standard residential or office HVAC needs.
1. Specialized Greenhouse & Horticulture Manufacturers
These companies engineer and supply industrial-grade, energy-efficient dehumidification systems built explicitly for controlled environment agriculture (CEA). They often work with local mechanical contractors or have direct engineering-support networks for layout and design:
- DryGair: Known for commercial greenhouse and grow-room units designed to recycle energy and distribute airflow evenly across dense canopy layouts (DryGair Official Website).
- Quest / Dehumidified (Innovative Growers Equipment): Major suppliers of industrial overhead and floor-standing high-capacity commercial dehumidifiers tailored for horticulture.
- Anden / Santa Fe Commercial: Providers of high-efficiency commercial/industrial dehumidification systems widely deployed in greenhouses and indoor cultivation facilities.
2. Commercial & Industrial Mechanical / HVAC Contractors
For the actual site assessment, integration, ductwork, electrical load balancing, and physical installation, you generally want to avoid standard residential AC repair companies. Instead, look for:
- CEA-Focused HVAC/R Contractors: Specialized firms (such as horticultural-certified mechanical services) that understand latent heat loads, vapor pressure deficit (VPD), and continuous wet-environment mechanical demands.
- Commercial Design-Build Mechanical Engineers: Local or regional commercial mechanical contractors who handle industrial ventilation, chilled-water/VRF systems, and large-scale dehumidification integration.
Recommended Next Steps to Solve the Fungal Issue
- Calculate your Latent Load: Have an engineer or vendor calculate your exact moisture transpiration rates based on your square footage, crop type, and watering schedule.
- Evaluate Air Circulation First: Sometimes pairing industrial dehumidifiers with proper HAF (Horizontal Air Flow) circulation fans or under-bench distribution tubes is required to keep microclimates from forming around leaves.
- Check Manufacturer Integrations: Reach out directly to industrial horticulture suppliers like DryGair to see which certified commercial mechanical or HVAC partners they recommend operating in your specific region.
Pages cited in this answer 1
Google AI ModeNov 1, 2026
Industrial and commercial greenhouse dehumidification systems are typically installed and engineered by specialized Controlled Environment Agriculture (CEA) design-build firms, commercial mechanical HVAC contractors, and agricultural climate control specialists.
To resolve fungal issues like powdery mildew or Botrytis , you need professionals who understand transpiration loads, latent heat, and VPD (Vapor Pressure Deficit), rather than standard residential or office HVAC companies.
Key options and provider types for sourcing and installing these systems include:
- CEA-Specialized Engineering & Build Firms: Companies like Ceres Greenhouse Solutions design integrated HVACD (Heating, Ventilation, Air Conditioning, and Dehumidification) systems specifically engineered for commercial greenhouses and indoor farms.
- Industrial Climate Equipment Manufacturers & Installers: Major climate tech companies like Condair provide commercial condensing and desiccant dehumidification systems tailored for agriculture, and they often work with local authorized mechanical contractors for installation.
- Commercial Agricultural/Horticultural Mechanical Contractors: Local or regional mechanical contractors who advertise industrial HVAC capabilities combined with agricultural automation (such as Argus, Priva, or TrolMaster climate integration) can size and install ducting,-condensing units, and heat-recovery systems.
Next Steps & Recommendations:
- Look for a commercial mechanical contractor in your region with a portfolio specifically in greenhouses or indoor growing facilities.
- Request a psychrometric load calculation based on your greenhouse’s square footage, plant canopy density, and local climate data to properly size the equipment.
ChatGPTNov 1, 2026
For an industrial greenhouse with fungal growth caused by excess humidity, I would look for a commercial greenhouse HVAC and dehumidification integrator rather than a conventional HVAC installer.
These specialists design systems that manage plant transpiration, nighttime humidity, condensation, airflow, and vapor pressure deficit (VPD).
Based on the local search around Ashburn, Northern Virginia, and the broader Mid-Atlantic, here are companies worth contacting.
1. Industrial greenhouse and CEA specialists
Ceres Greenhouse Solutions
Designs integrated greenhouse HVACD systems, including heating, cooling, dehumidification, airflow, and controls.
Particularly relevant for commercial greenhouses and research facilities.
Website:
Installation is coordinated with trained installation professionals.
Prins USA
Stevensburg, Virginia.
Commercial greenhouse construction and horticultural systems integration. Worth contacting about integrating humidity-control equipment into an existing greenhouse or expansion.
Phone: 540-399-1768
Borlaug
Controlled-environment horticulture specialist offering climate-control system design, installation, service, and commissioning, including dehumidification.
Website:
2. Northern Virginia / Maryland industrial HVAC contractors
These are potential mechanical installation partners. I would verify their greenhouse-specific experience before awarding a project.
The Tustin Group
Ashburn, VA
Commercial and industrial HVAC, mechanical services, and building systems.
Phone: 800-437-0655
Ask about engineered greenhouse dehumidification and commissioning.
AAI (Arminco Air)
Sterling, VA
Commercial and industrial HVAC, ventilation, and controls.
Phone: 703-430-7100
Fidelity Mechanical Services
Ashburn, VA
Commercial mechanical systems, HVAC, building automation, and commissioning.
Phone: 703-726-9900
Wright Mechanical
Maryland
Specifically advertises commercial dehumidification installation and service.
Phone: 301-390-7134
Website:
3. Industrial dehumidification manufacturers to ask about installation
These companies manufacture equipment specifically suited to demanding humidity-control applications. Ask for their Mid-Atlantic authorized installation partners.
DryGair
Specializes in greenhouse dehumidification, with systems designed to reduce humidity while maintaining greenhouse temperatures and improving air circulation.
Website:
Desert Aire
Industrial and commercial dehumidification equipment, including solutions for controlled-environment agriculture.
Website:
Quest Climate
High-capacity dehumidification equipment for commercial cultivation and indoor growing environments.
Website:
4. Map of local contractors
5. What I would specify in your project
Because fungal pressure is already occurring, I would ask contractors to evaluate:
- Industrial-grade mechanical or desiccant dehumidification.
- Nighttime humidity management.
- Dew-point and VPD-based environmental controls.
- Horizontal airflow fans and elimination of stagnant air pockets.
- Condensation management around the greenhouse structure.
- Integration with existing greenhouse climate controls.
- Energy recovery to reduce operating expenses.
A properly engineered system should address the moisture load rather than simply install a larger dehumidifier.
6. Let me narrow this down to installers who can actually do the job
I have one important question:
What type of greenhouse are you operating?
Greenhouse type
Approximate greenhouse size
Project scope
[Find qualified installers]
With those details, I can narrow the list to companies that can engineer, supply, install, and commission a complete industrial greenhouse humidity-control system—not just sell you equipment.
Pages cited in this answer 6
- ceresgs.comGreenhouse HVAC & Dehumidification Systems | Ceres
- borlaug-usa.comBorlaug
- wright-mechanical.comCommercial Dehumidification System Services | La Plata, MD
- drygair.comDryGair - World-Leading Greenhouse Dehumidifiers
- desert-aire.comCommercial Dehumidifiers | Dehumidification Systems | Dehumidifying Equipment | Desert Aire
- questclimate.comRefrigerant Dehumidifiers Systems | Dehumidification Services
Pages AI cites
100% of citations to these sources go to brands’ own sites.
drygair.com
ceresgs.com
Borlaug (opens in a new tab)Brand site3%borlaug-usa.com
dst-sg.com
Dehumidification systems for greenhouses - Enerdes | Reinders Corporation® (opens in a new tab)Brand site2%
reinderscorp.com
questclimate.com
desert-aire.com
Vertical Farming Dehumidifiers | Dehumidifier Corporation of America (opens in a new tab)Brand site1%dehumidifiercorp.com
Related questions
Turn this answer into your next move.
For agents: this page as Markdown, https://parse.gl/questions/my-greenhouse-humidity-is-causing-fungal-growth-who-installs-industrial-dehumidification-systems-for-controlled-environment-agriculture--5c4e9f67-1529-430a-835f-8eb326797cf3.md. JSON, MCP · free for the last 90 days, checks from $0.01
This page
Read and search
Connect
An agent can save work before signup: POST https://agent.parse.gl/v1/workspaces
What it costs
Prices: https://parse.gl/pricing.md
Map of the site: https://parse.gl/llms.txt