Circ holds a narrow lead over Hybridworks Textile Recycling for processing blended fabrics into reusable materials. FabScrap is the usual answer when buyers seek partners to handle pre-consumer scrap and commercial pickups.
Finding the right textile recycling partner for blended fabrics depends on the fiber composition, the volume you generate, and whether you need mechanical recycling, chemical fiber separation, or a partner that can turn waste into new textile products.
The key is to find a recycler that explicitly accepts mixed-fiber textiles—for example, cotton/polyester blends, elastane-containing fabrics, or mixed post-industrial textile scraps. Many conventional recyclers focus on single-fiber streams, so it's worth confirming their actual processing capabilities before shipping samples.
Best partners to contact first
These are the strongest leads I found for blended-fabric recycling, prioritizing companies whose published technology specifically addresses mixed fibers.
1. Hybridworks
(Strong match for cotton/polyester)
Hybridworks describes a process designed to separate cotton–polyester blends, recovering cotton fiber and polyester chemical building blocks. Its pilot plant is in Xenia, Ohio, with testing underway, so confirm its current commercial capacity and whether it can accept your material now.
BlockTexx uses its S.O.F.T. separation technology to process polyester/cotton blends, as well as 100% polyester, cotton and several other cellulosic fibers. It is a promising lead if you need a recycling processor rather than simply a collection service.
Huminly describes an enzymatic process for separating polyester and cotton, with purified outputs intended for textile-to-textile recycling. Ask about current pilot or commercial availability, minimum tonnage and whether your exact blend is eligible.
Circ focuses on polyester–cotton blends and uses a hydrothermal process to recover polyester and cellulose. It is worth approaching if your goal is to recover materials for reuse in new textiles. Confirm current intake arrangements and processing location.
RE&UP converts cotton, polyester and polycotton textile waste into new materials at industrial scale. This is a useful lead for larger, consistent waste streams where the priority is recycled fiber or material output.
These companies are technical leads, not confirmed accepting vendors for your particular waste stream. Their willingness to take outside feedstock, shipping geography, minimum quantities and commercial terms need to be verified directly.
What I would verify before choosing a partner
Ask each company these five questions:
Feedstock: Do you accept my exact fiber blend, including elastane, nylon, coatings or dyes?
Volume: What are your minimum batch size and annual tonnage requirements?
Logistics: Can you arrange pickup or accept shipments from California?
Outputs: Will the material become new textile fiber, recovered raw materials, insulation, wiping products or another product?
Commercial terms: Do you charge a processing fee, pay for feedstock, or offer a toll-processing arrangement?
Let's narrow this to the best fit
One important question: What type of blended fabric are you trying to recycle?
1. Fabric composition
Cotton / polyester
Polyester / elastane (spandex)
Nylon / elastane
Cotton / polyester / elastane
Multiple blends or unknown composition
Other blend
2. Where does the material come from?
Manufacturing scraps or cutting waste
Deadstock, unsold fabric or garments
Used or post-consumer textiles
3. Approximate volume
Under 1 tonne
1–10 tonnes
10–100 tonnes
Over 100 tonnes per year
4. Preferred recycling outcome
New textile fiber or yarn (closed-loop)
Separate and recover the original fibers
Any credible recycling route that diverts waste from landfill
5. Partner location
Bay Area / California preferred
Anywhere in the United States
Global partners acceptable
[Find matching recycling partners]
With these details, I can narrow the list to the most relevant partners and prioritize those that can realistically process your material, rather than companies that only collect or resell textiles.
Yes. I found several providers that are relevant, but the best fit depends on whether your “mixed-fiber” stream means cotton/polyester blends, multiple fiber types, or heavily contaminated post-consumer textiles.
Strongest candidates
Provider
Location
Mixed-fiber capability
Output
Fit
Circ, Inc
Danville, VA
Cotton/polyester blends
Recovered cellulose + polyester
Potentially excellent for Mid-Atlantic, but confirm current commercial intake
Martex Fiber Corp
PA / NC / SC
Cotton/polyester and other textile waste
Reclaimed fiber, recycled textiles
Good for established industrial waste streams
Leigh Fibers Inc
Wellford, SC
Natural + synthetic fibers and blends
Recycled/custom-blended fibers
Strong industrial option
Looptworks
Gresham, OR
Cotton, polyester, poly/cotton, nylon, wool, acrylic, etc.
Recycled spinning & nonwoven fiber
Best U.S. option I found for broad mixed-fiber streams
Hybridworks
Xenia, OH
Specifically cotton/polyester blends
Intact cotton + polyester monomers
Very interesting for true fiber separation, but currently pilot/testing stage
BlockTexx
Queensland, Australia
Poly/cotton plus other cellulosics
rPET/PET + cellulose
Excellent technology for hard-to-recycle blends
Looptworks is particularly compelling if you need an actual operating U.S. service provider. It says its Gresham facility accepts cotton/polyester blends as well as nylon, wool, acrylic and other fibers, with outputs suitable for yarn spinning or nonwoven manufacturing. Its minimum feedstock is 2,200 lb (1 metric ton).
Hybridworks is more technically aligned if your goal is separating a blended textile back into its constituent raw materials. Its process is designed to recover intact cotton fiber and polyester monomers from cotton/polyester blends. Its Xenia, Ohio pilot plant is currently undergoing testing ahead of commercial scale-up.
BlockTexx is another very strong technical match. Its commercial-scale Australian facility processes polyester/cotton blends and produces polyester PET pellets plus cellulose-based material; its stated input capacity is 10,000 tonnes/year.
If you're looking for a vendor to send your material to now, I'd prioritize:
Looptworks — broadest U.S. mixed-fiber capability and operational facility.
Martex Fiber — particularly worth approaching if the material is industrial/pre-consumer textile waste.
Leigh Fibers — strong option if your desired output can be reclaimed/custom-blended fiber.
Hybridworks — investigate if cotton/polyester separation into distinct raw materials is essential.
BlockTexx — excellent technology, but international logistics make it less convenient for U.S. feedstock.
One important distinction: mechanical recyclers generally produce reclaimed fiber, whereas companies such as Hybridworks and BlockTexx are pursuing chemical separation into material building blocks. If by “raw materials” you mean virgin-equivalent feedstocks rather than recycled staple fiber, I'd focus on the latter category.
If you tell me (a) approximate tons/month, (b) fiber composition—e.g. 60% cotton/40% polyester, and (c) whether the material is post-industrial or post-consumer, I can narrow this to 3 providers most likely to accept your specific waste stream and provide their contact/qualification details.
Recycling mixed-fiber and blended textiles (such as poly-cotton or multi-component assemblies) is one of the toughest challenges in the circular economy, but several innovative service providers and technology firms specialize in separating or processing these hard-to-handle material streams.[](https://circle-economy.com/knowledge-hub/article/8974)
Options vary by geographic focus, processing method, and whether your waste stream is pre-consumer or post-consumer:
BlockTexx uses a proprietary chemical separation technology (S.O.F.T. process) specifically designed to recover polyester and cotton blends from commercial textile waste, turning them into clean recycled PET and cellulose equivalent raw materials.[](https://www.blocktexx.com/)[[2](https://www.blocktexx.com/)]()
Worn Again Technologies operates a closed-loop chemical recycling process tailored for poly-cotton blends and contaminated textiles, extracting and separating polyester and cellulose to turn them back into virgin-equivalent raw materials.[](https://wornagain.co.uk/)
TerraCycle offers Zero Waste Boxes for mixed and synthetic fabrics that standard municipal or mechanical recyclers reject, mechanically processing difficult blends down into industrial raw material pellets.
To help narrow down the ideal provider, could you share:
The approximate volume and frequency of the textile waste?
The exact composition of the mixed fibers (e.g., poly-cotton blends, nylon-spandex, multi-layered fabrics)?
Your geographic location or where the waste is generated?
